Staircase handrail with top bend and a length of plain handrail Staircase Handrail for 50 inch "Bull" Engine
Stop for pump rod, comprising two halves to clamp around rod, and two pad plates, one with wooden pad and 5 bolts for the other Stop for pump rod
10 handrail stantions from stairs item 60 (some have tops broken off, one has broken foot); 13 similar stantions for horizontal rail on front of working floor (one broken) and one heavier corner stantion 10 handrail stantions from stairs item 60
3 swinging guides for rods (item 47) with 6 bearing pieces (1 broken & corner lost) and 5 rubber bumpers 3 swinging guides for rods
Brass kerb to surround plug rod on working floor (2 pieces); cylinder lubricator; 1/2" screw down valve and trap; 6 pairs of brasses for arbors on plug frame (stamped inverted V for A,B,C,D,E,F); 3 ebonite plug cocks and a wooden back board for a gauge Brass kerb to surround plug rod on working floor
7 cast brackets (1 broken in eye) and 6 stanchions (1 with broken shank. All have top pins cut off) for gallery around cylinder. Note : Piece of curved handrail removed from this lot and put with other pieces found later, item 67 7 cast brackets and 6 stanchions
Beam with gudgeon stool, links (complete) and loop for plug rod and air pump rod. The pin for the piston rod cap is not fitted Beam with gudgeon stool
Condenser cistern with condenser and air pump complete with bucket, rod and cover Condenser cistern with condenser and air pump complete with bucket
Common joists for working floor with wooden bearing pieces Common joists for working floor with wooden bearing pieces
Cataract rod with clevis and muff coupling, rod with clevis and screwed loop and screwed rod with small handwheel for regulating the cataract, rod with socket-end for injection cock and lever of unknown purpose with bearing crank that goes on cataract stage with a fork end light rod which probably connects to it Components for 50 inch "Bull" Engine 1876-1877
Light rod with forked end and bottle-screw adjustment, probably for driving engine counter Rod for 50 inch "Bull" Engine 1876-1877
Bracket plate, column, handwheel, rod in two lengths (flame cut joint not undone) ;and lever with swivel nut for working valve (sinking pipe or blowing through ?) on back (pit side) of condenser Components for 50 inch "Bull" Engine 1876-1877
Corner from base of column 3; a roller; a ball weight; nuts; bolts; washers and sundries. Some of these may belong to 1954-178 or to other objects altogether Corner from base of column
3 levers from arbors to weigh shaft, marked St. Ex. Eq; Equilibrium lever lacks clevis pin, others complete 3 levers from arbors to weigh shaft
11 [checker?] rolled tread-plates for working floor, and a disc of plate to go under steam valve bonnet 11 checker? rolled tread-plates for working floor
8 cast treadplates for the gallery around the cylinder 8 cast treadplates for the gallery around the cylinder